Maand: februari 2016
Jumper
Interaction Ideas II
Jumper: 1. Interaction with Music Both sleeves can trigger one sound / audio clip taken from the original soundtrack. Every circle on the dancefloor is connected to two sounds, in total twelve different soundclips (one for every sleeve). By moving the sleeves with the accelerometers, the sounds are influenced through timestretching. These specific sounds are […]
Staccato Chute
Motor_Power_Control
The motors that move the chutes are small but rather strong. At 12 Volts they pull around one or two Amps when they are mounted to a chute. During the first test with the motor controllers, we discovered that when a motor is suddenly turned the opposite way, a reversed current arises. Using an ordinary […]
Platform_Dancefloor_Pattern
Today we’ve finished the floor! Well… almost. The platform was build by Joris Ringers. We put the velostat sensors on it and tested them if the signal was good enough to sense by an arduino. The floor measures 2 by 2 meters. It is made from 1 square meter wooden tiles. On top there will be the 0,50 by […]
Fan_Chute_Test
Today we’ve tested the red/white chute again. This time with the right fans; two 35cm diameter fans and one 45 cm diameter fan. The airflow is much stronger from the bigger fan since the motor is 40 watts stronger. With that in mind, we positioned the bigger fan further away from the chute. By placing […]
